Time; Led - Surveillance Systems AVN314 (ONVIF) Benutzerhandbuch

4.7.5 Time

Set daylight saving time and the current time, and click "Save" to confirm.
Function
Time Configuration
Date
Time
Daylight Saving Time Configuration
Daylight Saving Time

4.7.6 LED

In "LED Configuration":
To allow the LED to be activated manually, select "Yes" in "Manual Enable".
To set the LED to be activated automatically when the light condition gets dark, select "Yes"
in "Auto Enable", and set the sensitivity for the camera to determine how dark the LED
should be activated. There are three options: HIGH / MEDIUM / LOW.
To adjust the brightness level of the LED, drag the slider from left to right in "Light".
Note: When you adjust the brightness level of the LED light, please drag the slider from
the very left, and slightly move to the right to find the suitable light brightness.
Note: When the brightness level is adjusted to 100%, the system will enable the
brightness of 100% for 3 minutes, reduce to 50% for 1 minute, and return to
100% for 3 minutes, etc. This is to protect and extend the lifetime of the white
LED.
Description
Set the current date.
Set the current time.
Specify whether to use daylight saving time (Enable / Disable).
If this function is enabled, set the time period (Start Time / End Time), and adjust the daylight
saving time in hours (Adjust Time).
24