Face Tracking Configurations - Surveillance Systems AVN314 (ONVIF) Benutzerhandbuch

Function
Flip
Full Screen
Smart Zoom
Face Tracking
DPTZ
Audio On / Off
White LED
** Face Tracking, DPTZ & Smart Zoom can't be activated simultaneously.

4.3 Face tracking configurations

Face tracking is used to especially zoom in on the intruder's face, easy for everyone to identify.
Note: When this function is enabled, DPTZ, Smart Zoom, and optical zoom are not allowed to use.
Note: Face tracking is not supported when the stream format is set to Multi-Mode, and this menu will not
be shown in the configuration page.
STEP1: Click "Config."
STEP2: Select and set as described below:
ITEM
Face Tracking
OSD
Sensitivity
Resolution
STEP3: When all the configurations are done, click "Save" to save your changes, and click "Live" on the top to return
to the live view.
Icon User Level
Supervisor / Power User /
Normal User
Supervisor / Power User /
Normal User
Supervisor / Power User /
Normal User
Supervisor / Power User /
Normal User
Supervisor / Power User /
Normal User
Supervisor / Power User /
/
Normal User
Supervisor / Power User /
Normal User
"Camera" "Face Tracking" to enter the configuration page.
DESCRIPTION
Select "Enable" to activate or "Disable" to deactivate this function.
Select "ON" to display the following status messages on the live view:
FACE STANDBY: This function is activated and ready to use.
FACE TRACKING: This function is tracking.
FACE ZOOM IN / OUT: This function is zooming on the face for tracking / zooming out when the tracking object
leaves the surveillance area.
Set the tracking sensitivity from HIGH / MEDIUM / LOW.
Set the resolution for face tracking from Auto / VGA / QVGA.
Description
Click to rotate the image 180
Click to display the image in full screen.
To exit the full screen mode, press "Esc" on your keyboard.
Click to activate the digital smart zoom function.
Click to enable the face tracking function.
Note: This function is disabled when the stream format is set to
"Multi-Mode".
Click to enable digital PTZ functions.
Click to switch the audio on / off.
Click to enable the white LED.
Before enabling the white LED, make sure you've already adjusted the
brightness of the light to the level you need in "Config."
"LED".
Note: The LED will also be enabled when you've scheduled it to be
activated in "Config."
15
0
counterclockwise when necessary.
"Camera"
"Camera" "LED".