Cruise - Surveillance Systems AVN314 (ONVIF) Benutzerhandbuch

How to check an existing preset point
In "Available Positions", select the name of the point you want to check from the drop-down list,
and click "Goto".
You will see the camera view on the right side moving to the point it's recorded.
How to delete an existing preset point
In "Available Positions", select the name of the point you want to check from the drop-down list,
and click "Remove".

4.7.3 Cruise

Note: Before using this function, make sure you have finished setting several preset
points.
Here defines how the auto mode of the camera is going to work when
Sequence or Auto Pan.
Auto Pan
When "Auto Pan" is selected here and
panning in the 5x zoom-in ratio.
Sequence
When "Sequence" is selected here and
start patrolling each preset point defined in "Sequence".
Step1: Click "Add" to choose a preset point from the drop-down list, and select the duration to
stay at this point from 1 ~ 60 minutes.
Then, click "Save" to confirm.
is clicked on the DPTZ page, the camera will start
is clicked on the live view page, the camera will
22
is selected: