Camera Configurations Via Web Browser; Accessing The Camera - Surveillance Systems AVN314 (ONVIF) Benutzerhandbuch

4. CAMERA CONFIGURATIONS VIA WEB BROWSER

Users can also access the network camera via a web browser, such as Microsoft Internet Explorer,
Mozilla Firefox, Google Chrome and Safari.
Note: It's recommended to consult with your installer before changing system
configurations.
Note: You need to be the supervisor to enter the system configuration page. If not,
please re-log into the camera with the supervisor user level.
However, the web browser is only available for single device access. If users want to access more
than two devices through one interface, it's recommended to use our supplied CMS software, Video
Viewer. For details, please refer to "3. ACCESSING THE CAMERA VIA VIDEO VIEWER" at page 4.
Before using the network camera, make sure you have configured the network settings and have the
IP address, user name and password used for accessing the camera in hand. If not, please refer to
the installation guide.

4.1 Accessing the camera

Step1: Open your web browser, and key in
For example, for IP address 60.121.46.236 and port No. 888, please key
in "http://60.121.46.236:888" into the URL address box, and press "Enter".
Step2: In the login page, key in the user name and password, and enter the security code from the
image below if any. Then, click "LOGIN".
Step3: The wizard is then started.
‧ To skip the wizard and directly access the camera live view, click "Close".
‧ To directly access the camera live view without starting the wizard for the login next time, check "Do not start
wizard at login".
Step4: When the login is successful, the live view is shown.
http://ipaddress:portnum
13
in the URL address box.