Channel Input - Sony XM-4ES Bedienungsanleitung

The following shows the connection and settings
typically used when connecting a car audio unit and
this amplifier. Refer to the operating instructions
supplied with your car audio for more details about
the input connection for your car audio unit.
 4-channel input
With "Speaker Connection" (page 11) .
FRONT
AUDIO OUT
INPUT MODE
+ +
1-4 1 3/2 4
1 1-2
* Use a speaker wire-to-RCA adaptor (not supplied) for high-
level input connection.
Note
When making this connection, set the INPUT MODE switch
to the "1-4" position.
 1-channel input
With "Speaker Connection" (page 11)  or .
INPUT MODE
+ +
1-4 1 3/2 4
1 1-2
* Use a speaker wire-to-RCA adaptor (not supplied) for high-
level input connection.
Note
When making this connection, set the INPUT MODE switch
to the "1" position.
10
GB
REAR
AUDIO OUT
* *
AUDIO OUT
*
 2-channel input
With "Speaker Connection" (page 11) .
INPUT MODE
+ +
1-4 1 3/2 4
1 1-2
* Use a speaker wire-to-RCA adaptor (not supplied) for high-
level input connection.
Note
When making this connection, set the INPUT MODE switch
to the "1-2" position.
 2-channel input (for bridged
connection)
With "Speaker Connection" (page 11) .
INPUT MODE
+ +
1-4 1 3/2 4
1 1-2
* Use a speaker wire-to-RCA adaptor (not supplied) for high-
level input connection.
Note
When making this connection, set the INPUT MODE switch
to the "1-4" position.
AUDIO OUT
*
AUDIO OUT
*