Connecting Components With Analog Audio Input/Output Jacks - Sony TA-F501ES Bedienungsanleitung

Connecting components with analog audio input/
output jacks
You can connect a component with analog
audio jacks, such as a Super Audio CD player
or CD player, etc. to this amplifier.
Use an audio cord (not supplied) to connect a
component to the analog audio jacks.
Connect the white plug to the L jack and the
red plug to the R jack.
Turntable
Note
If your turntable has a ground (earth) wire, connect
it to the (U) SIGNAL GND terminal to avoid a
humming noise.
6
GB
Super Audio CD
player,
CD player,
VCR
Audio cord (not supplied)
White
(L)
Red
(R)
Tape deck