Basic Operations; Settings; Setting The Master Clock And Word Connectors - Tascam Sonicview 16 Bedienungsanleitung

Basic operations

Touchscreen operations
Tap/swipe an item on a touchscreen to operate it.
Special touchscreen operations
Touch continuously
Tap/touch continuously
Return to previous screen
Screen name
LCD knob operations
The LCD knobs can be used to control the parameters shown and selected above them on the touchscreen.
When LCD knobs can be used, the corresponding indicators light.
LCD knob
Turn without pressing
Turn while pressing

Settings

Setting the master clock and word connectors

To set the master clock and WORD connectors for the unit, press the MENU key (q) to open the Menu Screen. Then, from the System
Setup menu, select the Sync Clock item to open the SYNC CLOCK Screen.
14
TASCAM Sonicview 16/Sonicview 24
Continuously touching a +48V button will turn it on/off.
Tapping the DIM button on the MONITOR/SOLO page of the MONITOR SETUP screen, or tapping
the TALKBACK button on the TALKBACK/OSCILLATOR page will turn that function on/off.
Touching it continuously will turn it on temporarily until released.
Open pull-down menu
LCD knobs and indicators
Explanation
This allows precise adjustment of one step per click.
This allows quick parameter adjustment from one extreme to the other.
Switch to Home Screen
Open Settings Screen