Specifications And Rated Values; Audio Performance; Analog Audio Input And Output Ratings; Sonicview - Tascam Sonicview 16 Bedienungsanleitung

Specifications and rated values

Audio performance

0 dBu = 0.775 Vrms
Mic amp EIN (equivalent input noise)
-128 dBu or less
Frequency response
MIC/LINE IN to OUTPUT (Analog)
20 Hz - 20 kHz: +0 dB, -0.5 dB (48 kHz) (JEITA)
20 Hz - 40 kHz: +0 dB, -1.0 dB (96 kHz) (JEITA)
Dynamic range
108 dB or more ( MIC/LINE IN to OUTPUT (Analog), PAD = OFF,
A.Ref = +4 dBu, GAIN = 12,
Clock master = INT, JEITA)
110 dB or more ( MIC/LINE IN to DANTE OUT, PAD = OFF,
A.Ref = +4 dBu, GAIN = 12, JEITA)
112 dB or more ( DANTE IN to OUTPUT (Analog),
Clock master = INT, JEITA)
Distortion
0.002% or less ( MIC/LINE IN to OUTPUT (Analog), Input at +4
dBu, PAD = OFF, A.Ref = +4dBu, GAIN = 12,
JEITA)
0.002 % or less ( MIC/LINE IN to DANTE OUT, Input at +4 dBu,
PAD = OFF, A.Ref = +4 dBu, GAIN = 12, JEITA)
0.002 % or less ( DANTE IN to OUTPUT (Analog), Input at 0
dBFS, JEITA)
Crosstalk
100 dB or more ( MIC/LINE IN to OUTPUT (Analog), 1 kHz sine
wave, JEITA)
A.Ref: Analog Reference Level setting

Analog audio input and output ratings

0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms
MIC/LINE input jacks

Sonicview 16: 1-16

Sonicview 24: 1-24
Connectors: XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
Input levels:
Pad off
Maximum input level: +12 dBu (TRIM at minimum)
Minimum input level: -62 dBu (TRIM at maximum)
Pad on
Maximum input level: +32 dBu (TRIM at minimum)
Minimum input level: -42 dBu (TRIM at maximum)
Input impedance: 5.0 kΩ or more
NOTE
+48V phantom power can be supplied to each MIC/ LINE
input jack separately.
24
TASCAM Sonicview 16/Sonicview 24
LINE IN (BAL) jacks
Sonicview 16: 9-16
Sonicview 24: 17-24
Connectors: 6.3mm (1/4") TRS phone jacks
(Tip: HOT, Ring: COLD, Sleeve: GND)
Input levels:
Pad off
Maximum input level: +12 dBu (TRIM at minimum)
Minimum input level: -62 dBu (TRIM at maximum)
Pad on
Maximum input level: +32 dBu (TRIM at minimum)
Minimum input level: -42 dBu (TRIM at maximum)
Input impedance: 5.0 kΩ or more
INSERT jacks
Sonicview 16: 7-8
Sonicview 24: 15-16
Connectors: 6.3mm (1/4") TRS phone jacks
(Tip: SEND, Ring: RETURN, Sleeve: GND)
RETURN (Ring)
Maximum input level: +18 dBu
Nominal input level: -2 dBu
Input impedance: 5 kΩ or more
SEND (Tip)
Maximum output level: +18 dBu
Nominal output level: -2 dBu
Output impedance: 100 Ω
TALKBACK input jack
Connectors: XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
Maximum input level: +10 dBu
Minimum input level: -65 dBu
Gain adjustment range: 0 - 55 dB
Input impedance: 5.0 kΩ or more
NOTE
+48V phantom power can be supplied.
ST IN 1-2 L/R jacks
Connectors: RCA pin jacks
Maximum input level: +6 dBV
Nominal input level: -10 dBV
Headroom: 16 dB
Input impedance: 10 kΩ or more
OUTPUT 1-16 jacks
Connectors: XLR-3-32 equivalent (1: GND, 2: HOT, 3: COLD)
Output impedance: 100 Ω
Nominal output level:
+6dBu (D.Ref: -9 dBFS, A.Ref:+6 dBu)
+4dBu (D.Ref: -14/-16/-18/-20 dBFS, A.Ref: +4 dBu)
0dBu (D.Ref: -18/-20 dBFS, A.Ref: 0 dBu)
Maximum output level:
+15 dBu (D.Ref: -9 dBFS, A.Ref: +6 dBu)
+18 dBu (D.Ref: -18 dBFS, A.Ref: 0 dBu)
+20 dBu (D.Ref: -20 dBFS, A.Ref: 0 dBu)
+18 dBu (D.Ref: -14 dBFS, A.Ref: +4 dBu)
+20 dBu (D.Ref: -16 dBFS, A.Ref: +4 dBu)
+22 dBu (D.Ref: -18 dBFS, A.Ref: +4 dBu)
+24 dBu (D.Ref: -20 dBFS, A.Ref: +4 dBu)
D.Ref: Digital Reference Level setting
A.Ref: Analog Reference Level setting