Printer Settings; Figure 30: Printer Settings; Figure 31: Printed Measurement Log; Figure 32: Printing Not Possible Warning Message - Sarstedt Sediplus S 2000 NX Gebrauchshinweis

EN
5.1.7

Printer settings

If measurement logs are to be printed via a printer connected to the USB interface, the print interface must be activated
in the Settings. The functionality of the printer can be checked in this menu item (test print).

Figure 30: Printer settings

If the printer is activated, the measurement log is automatically printed after a measurement is completed.

Figure 31: Printed measurement log

®
If printing is not possible, the measurement results will not be erased from the device even after the S-Sedivette has been
removed. After the measuring time has elapsed, a warning message appears, see Chapter 6.4 Premature removal of an
S-Sedivette ® .

Figure 32: Printing not possible warning message

91