- The following display appears:
Figure 13: Entering the ID
- Enter the ID number.
Another possibility is to accept the ID number proposed in the display (not consistently assigned to the patient)
by pressing the [OK] key.
- The following display appears:
Figure 14: Insert S-Sedivette
®
- Place an S-Sedivette
®
in any vacant position.
- The measurement starts automatically as soon as you have inserted an S-Sedivette
then the Start screen with the status display appears (Figure 12)
- You can use the [Cancel] button to cancel the process at any time as long as no S-Sedivette
®
into a vacant slot,
®
has been inserted into the device.
EN
81