imilab C20 Benutzerhandbuch Seite 6

3. Make sure to position the base unit so that the arrow is pointing up. Secure the base
unit in place by tightening the screws into the plastic anchors.
4. Matching the grooves on the bottom of the camera unit with the raised area on the
base unit. Press down until the two surfaces are flush, then turn the camera unit in
either direction to lock it in position.
Warning:
To avoid any damages or injuries, the device must be securely fastened to the floor/wall
as specified in the installation instructions.
When mounting the security camera on a wall:
Please note that the wall must be able to support at least triple the product's total
weight.
6