imilab C20 Benutzerhandbuch Seite 5

Installation
IMILAB C20 can be placed on a number of horizontal surfaces, such as a writing desk,
dining table, and coffee table. It can also be mounted on the wall.
Mounting IMILAB C20 on a Wall:
1. Drill two holes on the wall by using the base of the IMILABC 20 as a template. It is
recommended that you mark the locations of the hole with a pencil before drilling. The
diameter of each hole is approximately 6 mm, and the depth is approximately 30 mm.
2. Insert the two plastic anchors into the holes on the wall.
5