Technical Data - BOMANN WA 7185 Bedienungsanleitung, Garantie

Fault / possible cause / measures
Strong Vibration
- Have the transport bolts been removed?
- The appliance must stand on a solid surface. Are
the feet aligned?
Water inlet fault – error code F01
- Faucet is not open, water supply not free or wa-
ter pressure too low. Inlet filter blocked.
- Inlet hose is blocked, kinked, squeezed.
Drainage – error code F03
- Drain hose is blocked, kinked, squeezed, not
correctly connected.
- Drain pump is blocked.
Door lock fault – error code F13
- Door is not properly closed or blocked with laun-
dry items.
Door unlock fault – error code F14
- Press the Start/Pause- button or switch the unit
off and on again.
Water is continuously admitted – error code F24
- Check inlet water pressure and reduce if neces-
sary. Close water supply and call specialist com-
pany.
Electronic fault – further error codes F04-F98
- Switch the unit off and on again. If the fault per-
sists, call specialist company.
– Unb
Unbalance alarm
- Switch off the unit. Arrange the load again and
switch the unit on again. Start spin program.
NOTE:
If a problem persists after following the steps above,
contact your distributor or an authorized technician.

Technical data

Electrical connection / water supply........................
Connection voltage: ..................220-240 V~ / 50 Hz
Connection power: ...................................1800 W
Input power: ...............................................10 A
Water pressure: ...............................0.1 – 1.0 Mpa
Dimension H x W x D / weight...............................
Unit size: ..............................85.0 x 60.0 x 54.0 cm
Net weight: ..................................approx. 58.0 kg
Accessories available.........................................
Inlet hose safety system...............Art.-No. 8900 410
For more information about the product, scan the QR
code on the supplied energy label and/or visit the
official website of the product data bank:
https://eprel.ec.europa.eu
The right to make technical and design modifications
during continuous product development remains
reserved.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
39