Troubleshooting; Technical Data - BOMANN WA 7194 Bedienungsanleitung, Garantie

 Close the water supply and remove the inlet hose
from the water valve.
 Drain the water from the supply hose and from the
water valve.
 Reconnect the supply hose to the water valve.

Troubleshooting

Before you contact an authorized specialist
For some malfunctions, the display shows error
codes to warn you:
CODE / Trouble Possible cause / measures
Appliance does
Check the power supply / water
not work or start
supply. Is the door closed, the
device switched on or a program
selected?
Strong
Have the transport bolts been
Vibration
removed? The device must stand
on a firm surface. Are the feet
aligned?
Water inlet
F01 → Faucet is not open, water supply
fault
not free or water pressure too
low. Inlet filter blocked. Inlet hose
is blocked, kinked, squeezed.
Drainage
F03 → Drain hose is blocked, kinked,
fault
squeezed, not correctly connect-
ed. Drain pump is blocked.
Door lock
F13 → Door is not properly closed or
fault
blocked with laundry items.
Door un-
F14 → Press the Start/Pause- button or
lock fault
switch the unit off and on again.
See also
ing"
.
Water is
Check inlet water pressure and
F24 →
continously ad-
reduce if necessary. Close water
mitted
supply and call specialized com-
pany.
Others F04-F98 Switch the unit off and on again.
Electronic fault
→ If the error persists, call specialist
company.
All manuals and user guides at all-guides.com
"Emergency door open-
CODE / Trouble Possible cause / measures
Unbalan-
Unb → Switch the unit off. Rearrange
ce alarm
the laundry and switch the unit
on again. Start spinning program.
NOTE:
If a problem persists after following the steps above,
contact your distributor or an authorized technician.

Technical Data

Electrical connection / Water supply........................
Connection voltage: ..................220-240 V~ / 50 Hz
Connection power: ...................................1750 W
Input power: ...............................................10 A
Water pressure: ...............................0.1 – 1.0 Mpa
Dimension H x W x D / Weight...............................
Unit size: ..............................85.0 x 60.0 x 61.0 cm
Net weight: ..................................approx. 67.0 kg
Accessories available.........................................
Inlet hose safety system...............Art.-No. 8900 410
For more information about the product, scan the QR
code on the supplied energy label and/or visit the
official website of the product data bank:
https://eprel.ec.europa.eu
The right to make technical and design modifications
during continuous product development remains
reserved.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
39