Troubleshooting - BOMANN WA 7185 Bedienungsanleitung, Garantie

Haushalts- waschmaschine

Vorschau ausblenden

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

Inlet filter at the tap

Clean the filter when not enough water is supplied

with opened water valve.

• Unscrew the inlet hose from the water valve.

• Wash the inlet filter under running water. Recon-

nect the inlet hose firmly.

Inlet filter at the appliance

Clean the filter regularly, approximately every one to

three months.

• Unscrew the inlet hose from the appliance back.

• Remove and clean the filter with a small brush.

• Insert the filter and reconnect the inlet hose firmly.

Cleaning the filter of drain pump

CAUTION:

The appliance must never be used without the filter.

The foreign object trap in the drain pump prevents

rinsed-out parts from blocking the drain pump sys-

tem. Clean the pump regularly, approx. once a

month; depending on use.

• Open the maintenance cover in the base of the

unit. Caution! For this, the use of a tool could be

necessary.

• Place a drip tray under to catch possible leaking

water.

• Turn the cap counterclockwise. Look for leaking

water! Turn the filter not completely out!

• Interrupt the water flow by turning the filter clock-

wise again.

• If the draining process is completed, turn out the

filter completely.

• Take off the filter and remove any dirt and foreign

objects.

• Insert the cap again and make sure it is tightened

well and no water can escape.

• Close the maintenance cover.

Freezing protection

If the appliance is out of operation and exposed to

temperatures below zero, observe the following

measures:

• Disconnect the unit from the power supply.

• Close the water supply and remove the inlet hose

from the water valve.

• Drain the water from the supply hose and from the

water valve.

• Reconnect the supply hose to the water valve.