Troubleshooting; Technical Data - BOMANN WA 7160 TL Bedienungsanleitung, Garantie

• Place a drip tray under to catch possible leaking
water.
• Turn the cap counterclockwise. Look for leaking
water! Turn the filter not completely out!
• Interrupt the water flow by turning the filter clock-
wise again.
• If the draining process is completed, turn out the
filter completely.
• Take off the filter and remove any dirt and foreign
objects.
• Insert the cap again and make sure it is tightened
well and no water can escape.
• Close the maintenance cover.

Troubleshooting

Before you contact an authorized specialist
Trouble Possible cause / measure
Appliance
Check the power supply / water sup-
does not
ply. Is the door closed, the device
work or start
switched on or a program selected?
Strong vib-
Have the transport bolts been re-
ration
moved? The device must stand on a
firm surface. Are the feet aligned?
Water inlet
Faucet is not open, water supply not
fault
free or water pressure too low. Inlet
filter blocked. Inlet hose is blocked,
kinked, squeezed.
Drainage
Drain hose is blocked, kinked,
fault
squeezed, not correctly connected.
Drain pump is blocked.
Water is
Check inlet water pressure and re-
continously
duce if necessary. Close water sup-
admitted
ply and call specialized company.
NOTE:
If a problem persists after following the steps above,
contact your distributor or an authorized technician.

Technical Data

Electrical connection / Water supply........................
Connection voltage: ..................220-240 V~ / 50 Hz
Connection power: ...................................2100 W
Input power: ...............................................10 A
Water pressure: ...............................0.1 – 1.0 Mpa
Dimension H x W x D / Weight...............................
Unit size: ..............................88.0 x 40.0 x 61.0 cm
Net weight: ..................................approx. 56.0 kg
Accessories available.........................................
Inlet hose safety system...............Art.-No. 8900 410
For more information about the product, scan the QR
code on the supplied energy label and/or visit the
official website of the product data bank:
https://eprel.ec.europa.eu
The right to make technical and design modifications
during continuous product development remains
reserved.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
36