Appliance Equipment; Installation - BOMANN WA 7185 Bedienungsanleitung, Garantie

NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
"Cleaning and Maintenance"
according to chapter

Appliance equipment

Appliance overview
1 Control panel
2 Appliance door
3 Maintenance cover
Delivery scope
1x inlet hose, 1x hose retaining bend, 4x transport
locking covers, 1x wrench

Installation

WARNING:
The unit must not be connected to the mains during
installing. Otherwise, there is danger to life or electric
shock hazard!
CAUTION:
For a correct operation the appliance must be con-
nected properly. The specifications for water supply
and drain as well as the electrical connection must
fulfill the required criteria.
4 Feet
5 Detergent dispenser
Remove the transport locking screws
CAUTION:
• Before using, all transport locking screws must be
.
removed from the appliance back. Otherwise, it
may cause serious damages.
• Keep the transport locking screws for later use /
transport. Never transport the appliance without
properly attached transportation safety!
• Unscrew the four transport bolts by approx.
30 mm using the supplied wrench.
• Press the bolts respectively inwards and loosen.
• Remove the four transport bolts to the front.
• Insert the enclosed cover caps.
• Before further transport: Reinsert the transport
bolts in reverse order.
Installation location
• The site should be located near the water inlet
and outlet, as well as near a properly grounded
power socket.
• Good ventilation around the appliance is required,
to dissipate the heat properly. Enough clearance
must be created for this purpose.
• The free space in front of the unit should be so
that the appliance door can be opened without
hindrance.
• Make sure that the floor on which the appliance is
installed, is even, heat-resistant and clean.
• Take care of a solid and horizontal position of the
appliance. If the appliance is not horizontally lev-
27