Grundig VCR 6230 Bedienungsanleitung Seite 59

7 Troubleshooting
Error 6: Water pump error. Please refer to the
manual or the application.
Error 7: Laser sensor error. Please refer to the
manual or the application.
Error 9: Charging operation error. Please clean
the charging contact area.
Error 10: Software error. Please turn off and
restart again.
Error 12: Abnormal operation. Please make
sure that the main button is turned on.
Robot Vacuum / User Manual
• Please clean the water tank and the water flow
under the vacuum cleaner and check the mop-
ping module. Please try to restart the vacuum
cleaner after cleaning.
• Please check for any foreign material inside the
laser sensor, clean if required and restart the vac-
uum cleaner.
• Please check for any contamination in the charg-
ing area and clean the charging poles.
• Please bring the main button to position O and
back to position I and restart the vacuum cleaner
• Please bring the main button to on position in-
itially
59 / EN