Skandika Freki Bedienungsanleitung Seite 29

Step 6:
1.Connect the Middle sensor wire NO.21 to the Lower sensor wire NO.22.
STEP 6
2.Attach the Support tube for computer NO.2 to the Front post NO.23, tighten with 2 Allen
NO.10.
1. Connect the cable ends (21 & 22) and fix the computer support (2) to the front support (23) with 2 screws
3. Connect the Middle sensor wire NO.21 to the Upper sensor wire NO.20.
(10).
4.Attach the Computer NO.3 to the Support tube for computer NO.2, tighten with 4 Screws NO
2. Now connect the cable ends (20 & 21) and mount the computer (3) to the computer support (2) with 4
screws (19).
2
22
10
10
23
Make sure that all connections are correctly tightened before using the unit.
3
19
21
19
21
21
22
29
SET-UP INSTRUCTIONS
20
20
21