Fitting The Wired-On Tag Plate Dk7004; Fit The Nameplate - Endress+Hauser Prowirl 200 Index C Installationsanleitung

9.2 Installing a new measuring cell, replacing the seal
The new measuring cell is installed in reverse order.
Prior to installation, grease the underside of the seal and the mating surface of the
measuring cell. This ensures that the seal is correctly positioned on the measuring cell
(see graphic below).
1 →
3.
1.
2.
10

Fitting the wired-on tag plate DK7004:

1
11

Fit the nameplate:

Fit the nameplate (optional) according to the existing device labeling (see →  6 Authorized
personnel).
Endress+Hauser
2 →
10 mm
EA01332D
3
13