Color Codes (Wifi Control Light); Activating Wifi; Deactivating Wifi; Reconnecting Wifi - Mill CO1200WIFI3 Bedienungsanleitung

8

Color codes (WiFi control light)

Activating WiFi

Press «add heater» on the home screen in the Mill-app. Follow the
instructions in the app.

Deactivating WiFi

Press 1 time on the WiFi button. The heater can now be used as described on
page 6 (usage without WiFi connection). Relevant only if WiFi is already installed.

Reconnecting WiFi

Press the WiFi button 1 time. Relevant only if WiFi is already installed.
Delete WiFi setting
Delete WiFi settings: Press and hold WiFi button for 5 seconds .
The heater has not been connected to WiFi. The heater keeps an even
temperature throughout the whole day and night
The heater is online in the Mill cloud
The heater's WiFi is deactivated by the user
When installing/connecting the Mill-app and cloud, the light will
flash in various speed. This is normal.
The heater has a problem connecting to or finding the WiFi si gnal. Please
do the following:
1. Please turn the heater OFF and ON again.
2. Please restart the WiFi router
3. Please check the WiFi router to make sure the capacity is sufficient for
the number of active devices connected at the same time
4. Please make sure 2,4 Ghz is activated. If the problem persists, please
get in touch with support.
The heaters are offline and have no contact with the Mill cloud