2-3 | Important Safety Information - Mill CO1200WIFI3 Bedienungsanleitung

Important safety information
You must obey common safety guidelines when using electrical
products, especially in the presence of children.
WARNING!
heat, always make sure the plug is pulled out before the
heater is moved or cleaned.
READ THE INSTRUCTIONS CAREFULLY
The product is intended for home use only.
•
Make sure the heater is connected to the house's regular
•
mains as indicated on the heater.
New heaters will produce a specific odor when used the first
•
time.This will stop after a short time and is completely harmless.
Check for any pieces of packing foam or cardboard that may
•
have fallen into the heating elements of the heater. These
pieces must be removed to avoid unpleasant odors.
Prevent the heater from overheating - do not cover.
•
Always turn off the heater and unplug it when not used for a
•
long period of time.
Pay special attention if the heater is used in rooms where
•
children, the handicapped or elderly reside.
The heater should not be set up directly beneath an electrical
•
socket outlet.
The cord must not be laid under any kind of carpet. Make sure
•
the cord is laid in such a way that nobody can trip on it.
The heater must not be used if either the cord or plug is dam-
•
aged.
The heater must not be used if it has been dropped on the floor
•
is damaged in any other way causing it to malfunction.
The cord must be repaired by the manufacturer or by an expert
•
if it has been damaged, to avoid dangerous situations.
Avoid using extension cords, which may overheat and could
•
possibly start a fire.
Never cover the air vents on the heater. Avoid potential fire
•
hazards by making sure the air intakes are not blocked or
covered. The heater should be used in rooms with normal flat
floors.
To avoid electric shock or damage due to the