Commercial Lock; Usage With Wifi Connection; Before Use - Mill CO1200WIFI3 Bedienungsanleitung

millnorway.com
After 3 seconds the display will show "CH", once you see "CH" release
enables/disables child lock.

Commercial lock

You can enable and disable commercial lock from inside the app.But in addition, you can
enable/disable commercial lock from the heater itself. Turn off the heater using the main
power switch. Turn the heater back on, within 5 seconds press the and hold
After 10 seconds the display will show "CO", once you see "CO" release
enables/disables commercial lock.

Usage with WiFi connection

A free app is available for downloading for iOS and Android.
By connecting your heaters with the iOS/Android device you can do the following:
• Control all your heaters situated in multiple locations . Everything is controlled with
the Mill-app (with same user)
• Set up weekly programs (or use the standard program already available in the
app) by using the 4 modes: Comfort, Sleep, Away and OFF
•
There is no need to edit your program if you get home earlier than normal one day
• Enable vacation mode for saving energy while you are away. The app will
automatically increase the temperature in your house before you get back home
• Share your house with other family members, making control easy
• If internet is down the heater will follow its weekly program which is stored on the heater.
One can easily turn off the WiFi on the heaters and control them manually, so that the
heaters keep an even temperature throughout the whole day and night.
• + many other things
To download the app search for "MillNorway" in Appstore or Google Play and install
the app on your device.

Before use:

Be aware that the Mill app must be installed before you can connect your heaters to your
WiFi network. You can then simply follow the instructions given in the app when connecting
your heaters. The heaters will connect directly to your router via WiFi with 2,4 Ghz mode b/g/n.
Bluetooth is needed for provisioning, so make sure its enabled.
Minimum OS requirement: iOS 8.0 and Android 5.0.
Go to our help desk at millnorway.com for more information or if you have
any questions regarding the Mill app, connecting to WiFi or other relating
questions.
ATTENTION ! The heaters will be connected directly to your WiFi router and it
is therefore important to make sure the router has sufficient capacity for the
number of active devices connected at the same time.
and the heater
and the heater
7