Rotary Hammer Safety Warnings - Makita HR2300 Betriebsanleitung

ENGLISH
(Original instructions)
1 Switch trigger
2 Lock button
3 Reversing switch lever
4 Rotation with hammering
5 Rotation only
6 Action mode changing knob
7 Protrusions
8 Grooves
9 Bit shank
10 Bit grease
11 Bit
12 Chuck cover
13 Grip base
14 Depth gauge
SPECIFICATIONS
Model
Concrete
Core bit
Diamond core bit
Capacities
(dry type)
Steel
Wood
No load speed (min
Blows per minute
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to EPTA-
Procedure 01/2014, are shown in the table.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
General Power Tool Safety Warnings
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
Explanation of general view
15 Toothed side of hex hole mark-
ing on the grip base
16 Toothed side of the depth gauge
17 Dust cup
18 symbol
19 Attachment at the foot of dust
cup
20 Bellows
21 Attachment
22 Inside periphery
23 Carved side
24 Cap
25 Groove
26 Blow-out bulb
HR2300
23 mm
68 mm
70 mm
13 mm
32 mm
–1
)
356 mm
2.7 - 3.1 kg
HR2600
0 – 1,200
0 – 4,600
3.0 - 3.4 kg
The term "power tool" in the warnings refers to your
ENE042-1
mains-operated (corded) power tool or battery-operated
(cordless) power tool.

ROTARY HAMMER SAFETY WARNINGS

Safety instructions for all operations
ENF002-2
1. Wear ear protectors. Exposure to noise can cause
hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3. Hold the power tool by insulated gripping sur-
faces, when performing an operation where the
cutting accessory may contact hidden wiring or
GEA010-2
its own cord. Cutting accessory contacting a "live"
wire may make exposed metal parts of the power
tool "live" and could give the operator an electric
shock.
27 Chuck adapter
28 Keyless drill chuck
26 mm
68 mm
80 mm
13 mm
32 mm
361 mm
3.1 - 3.6 kg
/II
HR2601
GEB243-1
5