Operating Parameters; Setting The Room Temperature - Palazzetti EASY TOUCH Verwendung Und Betrieb

2.3 OPERATING PARAMETERS

Stove operation is determined by the Power level, Fan and Temperature parameters set by the user.
2.3.1 setting the power level
The power level de昀椀nes the amount of heat produced by the stove and consequently directly a昀昀ects fuel
consumption.
To change the power level:
a) Use the
b) The power level value will 昀氀ash; set the value using the
to con昀椀rm the settings.
c) Press
2.3.2 Modifying the fan speed (Silent Range excluded)
To modify the fan speed:
a) Use the
b) The fan speed value will blink; modify the value by pressing
• "OFF" = the fan is completely excluded, and the stove will work with natural convection only (only on
models where featured);
• "1" minimun,..., "5" maximum;
• "Auto" = automatic functioning (the stove will set automatically the fan speed and the stove power
according to the room temperature);
• "Hi" = ultrarapid functioning (to use only in the case you need to quickly heat the room);
c) press the button

2.3.3 Setting the room temperature

Setting this value de昀椀nes the desired room temperature, read directly by a probe 昀椀tted on the stove.
To set the desired temperature:
a) Use the
b) The current value will 昀氀ash; change it using the
to con昀椀rm the settings.
c) Press
20
buttons to go to the power menu
buttons to go to the fan menu
to con昀椀rm the data you set.
buttons to go to the temperature menu
004776500 - 11/12/2019
and press ;
(buttons (1 minimum,....5 maximum)
and press ;
;
and press ;
buttons