Inhaltsverzeichnis
Werbung
M430
Bundle
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy
for the general population. The guidelines are based
on the safety standards previously set by both U.S. and
international standards bodies:
This product has been shown to be capable of compliance
for localized specific absorption rate (SAR) for uncontrolled
environment/general population exposure limits specified
in ANSI/IEEE Std. C95.1-1992 and has been tested in
accordance with the measurement procedures specified
in FCC/OET Bulletin 65 Supplement C (2001) and IEEE Std.
1528-2003 (December 2003).
RF Exposure FCC
Tests for SAR are conducted using standard operating
positions specified by the FCC with the phone transmitting
at its highest certified power level in all tested frequency
bands. The actual SAR level of the phone in operation can
be well below the maximum value. This is because the
phone is designed to operate at multiple power levels so
as to use only the power required to reach the network.
In general, the closer you are to a wireless base station
antenna, the lower the power output.
Before a phone model is available for sale to the public,
it must be tested and certified to the FCC that it does not
exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed
in positions and locations (e.g., at the ear and worn on the
body) as required by the FCC for each model. Body-worn
measurements may differ among phone models, depending
upon available accessories and FCC requirements. The
highest SAR value for this phone when tested for use
at the ear is 0.42 W/kg. While there may be differences
between the SAR levels of various phones and at various
positions, they all meet the government requirement for
safe exposure.
For body worn operation, to maintain compliance with FCC
RF exposure guidelines, use only accessories that contain
no metallic components and provide a separation distance
of 15mm (0.6 inches) to the body. Use of other accessories
may violate FCC RF exposure guidelines and should be
avoided.
12
Regulatory Information Canada
IC number M400 base station: 4979B-X9431
IC number M30 handset: 4979B-CT8436
This Class B digital apparatus complies with Canadian
ICES-003. This product meets the applicable Industry
Canada technical
specifications.
Interference information
Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may
cause undesired operation of the device.
Privacy of communications may not be ensured when using
this equipment.
Exposure to Radio Frequency (RF) Signals
This product is a radio transmitter and receiver. It is
designed and manufactured not to exceed this emission
limit for exposure to radio frequency (RF) energy set by
the Ministry of Health (Canada), Safety Code 6. These limits
are part of comprehensive guidelines and established
permitted levels of RF energy for the general population.
These guidelines are based on the safety standards
previously set by international standard bodies. These
standards include a substantial safety margin designed
to assure the safety of all persons, regardless of age and
health.
This device and its antenna must not be colocated or
operating in conjunction with any other antenna or
transmitter.
This device has been shown to be capable of compliance
for localized specific absorption rate (SAR) for uncontrolled
environmental / general public exposure limits specific in
ANSI/IEEE C95.1-1992 and had been tested in accordance
with the measurement procedures specified in IEEE 1528-
2003.
This product meets the applicable Industry Canada
technical specifications. / Le présent matériel est conforme
aux specifications techniques applicables d'Industrie
Canada.
Quick Installation Guide
2022006
Werbung
Inhaltsverzeichnis
