Herunterladen Inhalt Inhalt Diese Seite drucken

Assembly - Husqvarna S 138i Bedienungsanweisung

Vorschau ausblenden Andere Handbücher für S 138i:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 96
• For model S 138i: To
prevent accidental start during
maintenance, turn the safety
key to 0 and remove the
battery. Wait at minimum 5
seconds before you start the
maintenance.
• For model S 138C: To
prevent accidental start during
maintenance, disconnect the
power cord.
• Do the maintenance work
correctly to increase the
lifetime of the product and
decrease the risk of accidents.
Let an approved service agent
do the professional repairs.
Speak to your nearest service
agent for more information.
• Only do the maintenance
work written in this operator's
manual. More extensive work
must be done by an approved
service agent.
• Put on heavy duty gloves
when you use the dethatcher
Introduction
WARNING:
product, read the safety chapter.
WARNING:
prevent accidental start during assembly,
turn the safety key to 0, remove the battery
and wait at minimum 5 seconds.
937 - 006 - 05.10.2022

Assembly

Before you assemble the
For model S 138i: To
equipment. The dethatcher
equipment is very sharp and
cuts can easily occur.
• Keep the blades on the
dethatcher equipment sharp
and clean for the best and
safest performance.
• Let your service agent
regularly examine the
product and make necessary
adjustments and repairs.
• Replace damaged, worn or
broken parts.
• Obey the instructions for how
to change accessories. Only
use accessories from the
manufacturer.
• When not in operation, keep
the product, battery and
battery charger apart in a dry,
indoor and locked area. Make
sure that children and persons
that are not approved cannot
get access to the product,
battery or battery charger.
For model S 138C: To prevent accidental
start during assembly, disconnect the power
cord.
To assemble the handle
1. Loosen the lower knobs.
2. Move the knobs to the lower end of the grooves on
the left and the right side of the product. (Fig. 31)
3. Set the handle height in one of the 2 available
positions.
4. Move the knobs up in the direction of the handle until
they stop and you hear a click. (Fig. 32)
19

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

S 138c

Inhaltsverzeichnis