Husqvarna S 138i Bedienungsanweisung Seite 16

used to connect the battery that
supplies the motor with power.
• Start and stop the motor to do
a check of the safety key.
• If the safety key functions
correctly, the motor starts
only when the key is turned to
1.
(Fig. 28)
To examine the start inhibitor
Do a check of the start inhibitor
to make sure that it prevents
operation of the motor.
1. Push the motor brake handle
in the direction of the
handlebar. The start inhibitor
stops the movement.
2. Push the start inhibitor out.
(Fig. 29)
3. Release the start inhibitor
and make sure that it goes
back to its initial position.
To use the power cord holder
(model S 138C)
The power cord holder
decreases the strain on the
power socket and the power
cord. The power cord holder
also decreases the risk that you
fall.
1. Bend the power cord to a
small loop.
16
2. Put the loop in to the hole in
the power cord holder.
3. Put the loop around the
hook.
4. Pull the power cord to
tighten the loop around the
hook. (Fig. 30)
Battery safety
WARNING: Read the
warning instructions that
follow before you use the
product.
• Use Husqvarna rechargeable
batteries as a power supply for
related Husqvarna products
only. To prevent injury, do not
use the battery as a power
supply for other devices.
• Do not use non-rechargeable
batteries.
• Risk of electrical shock. Do not
connect the battery terminals
to keys, coins, screws or other
metal. This can cause a short
circuit of the battery.
• Do not put objects into the air
slots of the battery.
• Keep the battery away from
sunlight, heat or open flame.
The battery can explode and
cause burns and/or chemical
burns.
937 - 006 - 05.10.2022