Im3 Filtration System - iM3 GS Deluxe Gebrauchsanleitung

iM3 Filtration System

Water and CLS Enviro Solution Supply
Inline filters in the supply bottles help prevent particles from entering the system and
blocking handpieces. These filters are located in the distilled water and CLS Enviro bottles.
The inline filters will need to be checked and replaced if they appear dirty.
The use of distilled water is mandatory in the water bottles, as local water may clog the
system and can corrode the brass valves in the system, apart from the risk of a bacterial
build up.
Note: Failure to use distilled water will
void the iM3 machine warranty.
iM3 Hygiene head system
The turbine in most high speed handpieces continues to revolve for a few seconds after use
and acts as a miniature centrifugal pump, sucking back air and water containing mouth
viruses and bacteria into the head of the handpiece.
The unique patented design of the iM3 Advantage LED HS handpiece prevents this taking
place.
iM3 Advantage Turbine for High Speed Handpiece L5500
Note:
The use of other chlorhexidine solutions may cause crystal deposits
in handpieces and valves. Use of such solutions will void the warranty.
Do not dilute CLS beyond the recommended label instructions, as it may
result in crystal deposits forming and block handpieces and valves. Chlorine
in water will cause chlorhexidine to flocculate—use only distilled water.
iM3 Dental Systems
9