Installation Instructions - iM3 GS Deluxe Gebrauchsanleitung

iM3 Advantage Low Speed Handpiece L6200
The low speed handpiece features include a light weight balanced profile and
smooth swivel action. Its vane type power system is quiet and vibration free. The
motor accommodates both doriot or ISO heads and its powerful torque is suitable
for all low speed procedures. The Low speed Motor operates at 20,000 RPM with
delivery pressure of 40 psi.
Operation Recommendations
Air pressure The dental unit air pressure
should be adjusted to be 40 psi
See page 16
Lubrication To assure optimal
performance and life the
handpiece should be
lubricated daily with MD-30 oil
lubricant. Instructions
for lubrication are found on page 20.
Air supply Moist or dirty air from the
compressor can cause damage.
Check the regulator filter regularly.
If dirt or moisture is present, replace
the regulator filter and bleed the
system, to remove water or oil.
Note: Polishing should be carried out at 5,000 rpm or less. This can be
accomplished by running the motor at full revs (20,000 Rpm) and use a 4:1
reduction head, to achieve 5,000 revs, maintaining torque.

Installation Instructions

1. Preset the air pressure to 40 psi
1. Connect the low speed handpiece to the
2. Fit the 4:1 Advantage straight nose cone.
3. Depress the foot control fully to operate the
iM3 Dental Systems
(see page 16)
grey handpiece line
Attach the Blue R&R oscillating prophy head
low speed handpiece
11