Handpiece Maintenance - iM3 GS Deluxe Gebrauchsanleitung

Handpiece Maintenance

All Handpieces have a working life which can be extended by maintaining the
correct operating pressures and speeds as well as adequate lubrication.
The working life of most Handpieces turbines is 12-24 months, however, this will
depend upon the degree of care taken and the amount of use.
Preventative maintenance will ensure a working Handpiece at all times.
Handpiece
iM3 Low
Speed Oil AM or PM
Handpiece before or after
Oil in smaller of use.
2 big holes.
Depress the 2-3 drops
foot pedal for
10 seconds to Use iM3 MD-30
ensure the oil Lubricant.
reaches the
Turbine
(page 17)
iM3 High Oil AM or PM
Speed before or after
Handpiece as use.
per the instruc- 2-3 drops
tions for the
Low speed Oil with MD-30
above. Lubricant.
Page 17.
Prophy Head Dispose of prophy
R&R Oscillat- head between pa-
ing tients to prevent
cross contamina-
tion
Daily Weekly
iM3 Dental Systems
Monthly Yearly
Replace turbine
and 'o' rings
and sealing
gasket. If worn
Replace turbine
and 'o' rings
and sealing
gasket. If worn
19