Im3 Distilled Water And Cls Enviro Solution Supply - iM3 GS Deluxe Gebrauchsanleitung

8

iM3 Distilled Water and CLS Enviro Solution Supply

Each iM3 dental system is supplied with an amber and clear water bottle which should be
filled only with distilled water to assist in preventing mineral or bacteria build up in the
handpieces. This water bottle supplies the high speed handpieces, 3 way air water syringe
and ultra sonic scaler coolant outlet .
The CLS Enviro Solution supply and water system allows you to choose between distilled
water or CLS Solution at the flick of a switch, depending on the dental procedure you wish
to perform. The CLS solution contains chlorhexidine which is light sensitive and should be
kept in the amber bottle provided.
The coolant system for your iM3 dental system, has been preset at 25 psi.
Refilling Coolant Bottles
To refill the distilled water or CLS solution, flip the coolant pressure switch (p. 4 F) on your
dental system to OFF - depressurizing the system. After the system has been
depressurized, unscrew the bottle and refill with either distilled water or CLS Solution. After
filling the coolant bottle screw it back into the holder and flip the coolant switch to ON,
repressurizing the system.
DO NOT OVERTIGHTEN THE BOTTLES.
Please Note: When the day's dental procedures are complete, flip the ON/OFF coolant
switch to the OFF position, depressurizing the coolant bottles for storage.
Here's what Dr Jeanie Hawkins, DVM, Diplomat AVDC had to say about CLS
Solution and the Auto Flush System.....
"Having CLS Solution at my fingertips to flush periodontal pockets is a real plus. iM3® is the only
Company to address the problem of cleaning the airlines and high speed handpieces."
iM3 CLS solution 250ml - Ordering Code C3130
iM3 Dental Systems