iM3 GS Deluxe Gebrauchsanleitung Seite 14

High Speed Handpiece - LED Advantage HS HP L5200s
The High Speed Handpiece is designed to operate at a pressure of 40 psi at the handpiece
and at speeds of up to 350,000 rpm. A very light touch is necessary as handpieces
operates with very low torque and high speed. Pressure on the handpiece of 30gms
(1ounce) or more, will cause the bur to stall.
Note: All handpieces should be lubricated prior to use with
Bur Replacement - iPush Tool (iM3 ordering code L7050)
Follow the instruction below to fit and use the tool on the handpiece.
1. Place the iPush onto the LED Advantage
handpiece.
2. Depress the lever with your thumb and
insert the bur all the way until it stops.
3. Remove the iPush before using the Hand-
piece.
4. To change the Bur repeat step 2. and re-
move the Bur.
To increase the life of the Handpiece, Oil be-
tween each use and replace the Bur between
each patient. See Handpiece manual.
iM3 Dental Systems
iM3 MD-30
14