Security Measures - Crosscall CORE-Z5 Schnellstartanleitung

PHONE CONFIGURATION
To set up your phone, select your language and follow the instructions
displayed on the screen.
DATA TRANSFER BETWEEN YOUR OLD AND NEW PHONES
When you start up your new phone and take the first steps to configure
it, you will automatically be offered the data transfer step.
1. Turn on your new phone, select the desired language and click Start
to begin the configuration steps on your new phone.
2. During these steps, connect your new phone to a mobile or WIFI
network. It is imperative that both your old and new phone are
connected to the Internet.
3. When the «Copy apps & data» window appears, click Next.
The option 1 to transfer data via an old device is displayed, click on
Next and follow the steps described in «Option 1: Use your old device».
If you do not have a cable or you want to transfer your data via the
Google application, select «No cable?», then «continue». You can
then follow the instructions described in «Option 2: Use the Google
application».
Option 1: Use your old device
1. Turn on and keep your old device unlocked
2. Use a cable that fits your old device, such as a charging cable
3. Connect your old device to the new one with the cable
4. Copy the data to your new device by following the instructions on
the screen of the old device
Option 2: Use the Google application
1. Open the Google application on your old device
2. Say «OK Google, Set up my device» or type «Set up my device» in
the search box
3. Follow the instructions and select the «name of your new device»
on your old device.
4. Validate the forms and values on your old device
5. Copy the data to your new device by following the instructions on the
screen of the old device
To find out more (transfer from an iPhone backup), read the user
guide available on the product page www.crosscall.com
X-LINK
TM*
THE SMART MAGNETIC ATTACHMENT SYSTEM
This magnetic connector on the back of your smartphone can
be used to attach and connect your smartphone to exclusive
X-LINK accessories in a single action. Depending on the
TM*
accessories, the X-LINK
TM*
data.
(*Magconn Technology)
12
can charge your phone or transfer
X-BLOCKER
In situations that require maximum hold, this exclusive
accessory supplied with your phone guarantees secure
attachment for your smartphone to compatible accessories. It
is easily attached to the slots on the side of your mobile. The
silicone coating reduces vibrations caused by knocks.
Discover the full range of accessories compatible with the X-LINK
and the X-BLOCKER on www.crosscall.com > Accessories
DELETING DATA (FACTORY RESET)
Before performing a reset, make sure you have backed up your
important data stored on the device.
To reset your phone to factory settings, go to
Settings > System > Reset options and click on «Delete all data»
(factory reset).
This action will erase all data from your phone' s internal
memory .
This menu also gives you the option of resetting just your preferences
or the Wi-Fi, mobile data and Bluetooth

SECURITY MEASURES

WATERPROOFNESS
• You have just bought an IP68 international standard-compliant
mobile phone. To guarantee optimal use and watertightness,
ensure that all the flaps covering the USB connectors and the
earphone jack are correctly closed.
• Do not open the back cover of the device if it is in water or a very
humid environment.
• The rubber seals attached to the flaps are key components of the
device. Ensure that you do not damage the rubber seal when you
open or close the waterproof cap. Ensure that the seal is free from
any debris, such as sand or dust, to avoid damaging the device.
• The flaps covering the openings may come loose in the event of
a fall or knock. Ensure that all the covers are properly aligned and
completely closed.
• If the device has been submerged in water or the microphone or
Loud speaker is wet, the sound may not be clear during a call. Make
sure that the microphone or loud speaker is clean and dry by wiping
it with a dry cloth. Do not push anything sharp (toothpick, metal
object or other) into the microphone or loud speaker because this
could damage the waterproof membrane.
• If you put your phone in sea water or chlorinated water, rinse it in
fresh water.
• If the device gets wet, dry it thoroughly with a soft, clean cloth.
• The water resistance of the device can lead to slight vibrations
under certain circumstances. These vibrations, for example when
the volume is turned up high, are entirely normal and do not affect
the performance of the device.
• Temperature fluctuation can lead to an increase or decrease in the
pressure, which may affect the quality of the sound. If required,
open the watertight flaps to release the air.
• Each time the mobile phone is immersed in water, dry the inside
TM*
13