Product Specifications; Warning Notices; In Which Areas Should Smoke Alarms Be Installed - Unitec EIM22-003 Bedienungsanleitung

2. Product specifications

Detection method:
Power supply:
Battery life:
Sound pressure level:
Alarm sensitivity:
Monitoring range:
Operating temperature:
Air humidity during operation:
Recommended replacement date:
Individual alarm display:
Alarm muting:
Low battery warning indicator:
Alarm muting in event of
low battery level:
Installation in habitable
recreational vehicles:
Installation location:
Interconnectable:

3. Warning notices

• To avoid injury, this device must be securely fastened to the ceiling/wall as per the
installation instructions.
• Batteries should not be exposed to excessive heat such as sunlight, fire or the like.
• Do not paint over or cover the smoke alarm.

4. In which areas should smoke alarms be installed

Smoke alarms must be installed in such a way that the fire smoke can reach the smoke alarm
unhindered, so that fires can be reliably detected in their early stages.
• Install in bedrooms (especially children's rooms) at the very least.
• Install in escape routes at the very least.
• Mount in the middle of the room ceiling.
• Keep a minimum distance of 50 cm from walls and other objects.
• Maximum installation height 6 metres.
• If ceiling mounting is not possible, the smoke alarm can be mounted on the wall. The distance to
the ceiling should be between 30 and 50 centimetres.
008153308321_30832_BDA_lang_sw_0722.indd 11 008153308321_30832_BDA_lang_sw_0722.indd 11
Optical sensor
Sealed battery (3V DC)
10 years
≥ 85 dB (A) at a distance of 3 metres
0.105 - 0.155 dB/m
40 m²
0 °C - 40 °C
< 93 %
See product label
Yes
Yes | Muting time: 5-15 minutes
Yes
Yes | Muting time: 10 hrs.
Yes
Ceiling or wall
No
11
26.08.22 09:36 26.08.22 09:36