VOLTCRAFT VC851 Bedienungsanleitung Seite 51

The device switches off automatically after a preset time if no buttons are pressed.
This prevents the battery from draining. The automatic shut-off function can be disa-
bled.
The front and rear of the device feature a switchable LED lamp that can be used
as a torch.
There is a fold-out stand on the rear of the device. This allows you to place the
multimeter on a level surface for better readability. There is also an integrated tripod
socket on the back.
Do not use the multimeter when the battery compartment is open or when the bat-
tery compartment cover is missing. A protective mechanism prevents the battery
compartment from opening when test leads are connected.
Do not take measurements in potentially explosive areas, damp rooms or adverse
conditions. Unfavourable ambient conditions include: Moisture or high humidity, dust
and flammable gases, vapours or solvents, thunderstorms and strong electromag-
netic fields.
For safety reasons, only use test leads or accessories that match the multimeter's
specifications.
The multimeter must only be used by people who are familiar with the relevant
regulations and understand the potential hazards. The use of personal protective
equipment is recommended.
Using this product for any purposes other than those described above may damage
the product and result in a short circuit, fire or electric shock. The product must not
be modified or reassembled!
Read the operating instructions carefully and keep them in a safe place for future
reference.
Always observe the safety information in these instructions!
51