SCOPREGA TURBO MAX 12V Anleitung Seite 12

M A N U A L O F
2. FOREWORD
Dear customer,
congratulations on choosing Scoprega.
We design and manufacture products of the highest quality to meet the needs
of our customers. Scoprega off ers the highest quality in service as well. Our
specialised departments provide support and instructions when needed, as well
as comprehensive technical service.
We thank you for your trust.
WARNING
Read these instructions before using the infl ator. Failure to follow all the instructions listed
below may result in damage to the product and/or cause serious injury to persons.
3. PRELIMINARY WARNINGS
1. Comply with all instructions in this document.
2. Keep these instructions.
3. Do not block the air vents (SEE FIGURE ON PAGE 3).
4. Always protect the power cable.
5. Do not open the infl ator. Refer all servicing to qualifi ed service personnel authorised by Scoprega.
Servicing is required when the device is damaged or not working in any way.
6. Do not tamper with the product. Opening the infl ator will void its warranty.
7. Provide suitable ventilation
8. Avoid placing objects near the product during operation.
9. Keep this product out of the reach of children.
10. The operating infl ator produces vibrations: therefore, we recommend you to use it on the fl oor, so
as to avoid accidental falls.
4. INTRODUCTION
The TURBO MAX is a high-effi ciency portable electric infl ator, which stands for reliability and
functionality. The TURBO MAX is equipped with two powerful DC motors that drive two turbines
connected in series, thus allowing any object to be infl ated to a pressure between 175 and 250 mbar.
The infl ator is equipped with LED indicators checking pump status during operation. The infl ator starts
when the ON button is pressed and automatically stops when the set pressure on the knob (2) is
reached. The device stops when the user presses the OFF button.
5. RECOMMENDED USES
Large infl atable objects (rubber dinghies / tents / rafts).
12
SAVE THIS INSTRUCTIONS MANUAL FOR REFERENCE