Technical Service / Warranty / Technical Information - Siemens PA0430M Gebrauchsanweisung

Technical service / Warranty / Technical Information

Technical service
Should your appliance fail to work properly
and all the instructions for use and installation
(especially the section headed
"Requirements....") have been carefully
observed, then remember that our Technical
Service Network is at your full disposal.
When contacting the Technical Service, quote
the model code (E-NR) and the appliance's
factory number (FD). This information can be
found on characteristics plate, Fig. 2.
Technical Information
Model
Maximum consumption (W)
Cooling (W)
Energy efficiency (letter)
Dehumidification (l/day) (*)
Power in heating function (W)
Fuse (A)
Working range
- Cooling (min./max. °C)
- Dehumidification (min./max. °C)
(*) The amount of water may vary when conditions in the room to be dehumidified are other than 30ºC and 80% RH.
Warranty
The conditions of warranty depend on the
relevant Supplier in a particular country.
Contact the establishment where you
purchased your appliance for more information
and quote the appliance model and factory
number. The receipt of purchase for the
appliance must be produced prior to any work
carried out under warranty.
34
PA0430M
950
2000
C
40
1800
10
20 – 35
18 – 35