Technical Service / Warranty - Siemens PA0620M Gebrauchsanweisung

Things to check before calling the Technical Service
Perfectly normal noise
J The sound of water flowing in cycles is due
to the pump, which circulates the water to
enhance the power of the appliance.
J A dull, humming sound is inevitable due to
the compressor.
J A faint, whistling sound is due to the
refrigerant passing through the thinner
pipes on the appliance when the
compressor starts up.
J A short clicking sound is produced when the
pump connects and disconnects or when
the regulator connects or disconnects the
electronics system.
Technical service
Should your appliance fail to work properly
and all the instructions for use and installation
(especially the section headed
"Requirements....") have been carefully
observed, then remember that our Technical
Service Network is at your full disposal.
When contacting the Technical Service, quote
the model code (E-NR) and the appliance's
factory number (FD). This information can be
found on characteristics plate, Fig. 2.

Technical service / Warranty

35
Easy-to-solve noises
J Make sure that the air expulsion tube and
the diffusion and collection sleeves are
fitted properly onto the appliance.
J Make sure that the air intakes and outlets
on the appliance are free of obstacles.
J Make sure that the appliance is not in direct
contact with furniture or other appliances.
The air output may be flowing directly onto
these and thereby increasing the noise
level.
Any other type of fault or repair work
should be dealt with by a specialised
Technician. Get in touch with your
authorised dealer, customer service or the
Technical Service Network.
Warranty
The conditions of warranty depend on the
relevant Supplier in a particular country.
Contact the establishment where you
purchased your appliance for more information
and quote the appliance model and factory
number. The receipt of purchase for the
appliance must be produced prior to any work
carried out under warranty.