Replacing The Lamps; Guarantee & Service - Sunshower DELUXE Anleitung

CLEANING AND MAINTENANCE OF THE SUNSHOWER
The front of the Sunshower is the only part that can be cleaned by the users: this includes the decorative frame (A), the
coated glass (B) and the operating panel (C).
Cleaning advice for the coated glass
The glass plate (B) is treated with a special coating to reduce the risk of scale. Dirt and spots can be best removed by using
a small quantity of Sunshower Glass Cleaner (R) and the Sunshower Pad provided (Q). Use a rubber wiper to wipe the
wet surface dry. Then rub the surface with a slightly moist terry cloth or a squeezed out chamois. The surface then dries
evenly. To restore the coating, use Sunshower After Care (S). Under no circumstances use glass cleaner or "multi-purpose
cleaner": as this often creates "dry spots" and/or leaves behind deposits.
Safety instructions Sunshower Glass cleaner & After Care
• Keep out of reach of children
• Do not swallow. If swallowed, drink large quantities of water and get medical help.
• Avoid contact with eyes. If product gets into eyes, flush with water.
For good maintenance of the glass, you can apply the Sunshower After Care. This product puts a new coating on the glass,
which reduces the risk of scale. A cleaning set can be bought from your dealer or contact us at:
www.Sunshower.nl
How do I order a new cleaning pack?
If you want to order a new cleaning pack, go to www.Sunshower.nl to contact a dealer near you.

REPLACING THE LAMPS

The UV output of the tanning lamps declines with time (this occurs under normal usage after a number of years). The
lifespan of the Philips HPA Cleo Swift 400 is 600-800 hours. After 600 burning-hours, the LED displays corresponding to
the lamps concerned on the operating panel (O) start to flicker after you press the start button (G). By pressing the start
button (G) again, you can continue using the Sunshower, but you are advised to contact your Sunshower installer (details
are stated on your certificate of guarantee). The lamps should only be replaced by a certified electrician!
Replacing the lamps yourself is prohibited, by opening the Sunshower the guarantee will be rendered void. If other lamps or glass
filters are used in the Sunshower, UV output can be altered greatly!
GUARANTEE & SERVICE
The final installation of the Sunshower must be performed by an installation company recognised by Sunshower. The
specialist shop where you purchased the Sunshower will arrange this. The certified installer will visit to install the Sunshower.
The guarantee is granted on the condition that the guarantee certificate is filled out by the certified installer and a copy
has been sent to Sunshower (www.Sunshower.nl for contact details).