Mixcder HD901 Bedienungsanleitung Seite 3

4. Charging the Battery
Use the supplied micro USB charging cable to charge the
headphone. It takes about 5.5 hours for the first charge and
about 5 hours for a subsequent charge after that. The
headphone LED turns to solid red during charging. When the
battery is fully charged, the LED turns off.
When the battery is low, the LED keeps red light. At the same
time the headphone also provides a low battery warning tone.
Note: It is strongly recommended fully charging for the first
use. Playtime varies according to volume level and audio
content .
Micro USB charging cable to the USB interface for charging
5. Pairing with Wireless Devices
1). Make sure the headphone is off.
2). Do not place both devices more than 3ft/1m away from
each other.
3). Press and hold the power button on the headphone until it
powers on but don't let go just yet. Continue holding down on
the power button until you see the LED indicator flashes blue
and red alternately and you will hear "Pairing", which means
your headphone is in pairing mode waiting to be paired.
4). Turn on the Wireless function of your device.
5). Select the Mixcder HD901 to pair. Once successfully
paired, you will hear "Connected" and the LED turns to solid
blue.
Micro USB
Charging Cable
EN-2
Laptop for Power Supply
USB charging adapter