References Marked On Instrument Or In Instruction Manual; Introduction / Scope Of Supply - BEHA Unitest 93560 Bedienungsanleitung

References marked on instrument or in instruction manual:

Symbol for the marking of electrical and electronic equipment (WEEE Direc-
tive 2002/96/EC).
Conformity symbol, the instrument complies with the valid directives. It com-
plies with the EMV Directive (89/336/EEC). It does not complies with the Low
Voltage Directive (73/23/EEC).
The instruction manual contains information and references, necessary for
safe operation and maintenance of the instrument. Prior to using the instru-
ment the user is kindly requested to thoroughly read the instruction manual
and comply with it in all sections.
Failure to read the instruction manual or to comply with the warnings and references
contained herein can result in serious bodily injury or instrument damage.
1. 0

Introduction / Scope of Supply

The instrument UNITEST Luxmeter 93560 represents a valuable support during
lighting system inspection, lighting intensity control, for the establishment of a
lighting intensity characteristic and for the control in compliance with the standard
value. The Luxmeter is equipped with the following features:
• Measurement of light intensity
• Calibrated in compliance with PTB standard using a standard illuminant lamp
2856 K
• 4 digit, numerical display
• External Sensor
• Carrying case
• Automatic measurement range selection
• Silicon-sensor
• Data Hold
• Data logger for 99 measurement data
Scope of supply:
1. Digital Luxmeter 93560
2. 6 pcs. batteries 1,5 V IEC LR03
3. Carrying case
4. Instruction manual
2