Copyright; Before You Start; Getting Started - Silvercrest SEMK 105 B2 Bedienungsanleitung Und Sicherheitshiweise

SilverCrest SEMK 105 B2
• The refrigerant circuit on the
damaged.

5. Copyright

All the contents of this user manual are protected by copyright and provided to the reader for
information only. Copying data and information without the prior explicit written consent of the
author is strictly forbidden. This also applies to any commercial use of the contents and information.
All texts and diagrams are up-to-date as of the date of printing. Subject to change without notice.

6. Before you start

Remove the SEMK 105 B2 ice cube maker and all accessories from the packaging and check that
the package contents are complete. Remove any protective films.
Keep the packaging material away from children and dispose of appropriately.

7. Getting started

Before making ice cubes to use for the first time, clean all parts of the ice cube maker to remove
any production residues. Proceed as described in the section on "Maintenance/cleaning".
CAUTION! Risk of damage to property
 After transporting the ice cube maker, leave it at least 2 hours to settle before use.
 The ambient temperature should be around 10°C to 32°C when in use.
Then plug the mains plug into a mains socket which meets the requirements. The "ICE MAKING"
LED (3) flashes green.
The ice cube maker is now in standby mode and is ready to use.
10 - English
ice cube maker must not be