auna iTuner CD Bedienungsanleitung Seite 56

EN
56
PBC Wlan setup
View settings
Manual settings
NetRemote PIN Setup
Network profile
Keep network
connected
3. Press the BACK button on the unit or remote control to cancel the setting
and return back to the previous menu.
Time/Date
The Time/Date can be automatically set once it has been connected to the
Internet, DAB or FM radio station with time/date information. You may also
adjust the Time/Date manually.
Press CLOCK button on remote control can access Set Time/Date menu to
adjust Time/Date.
During System settings mode, press
Date and press the SELECT button to confirm. Press
select Set Time/Date and press the SELECT button to confirm.
1. The date digits will flash on the display.
2. Press the
SELECT button to confirm.
3. Repeat above Step (2) to set the Month/Year/Hour/Minute.
4. The date and time settings are now complete.
For the other settings under Time/Date, press
from the following options and then press the SELECT button to confirm.
Auto update
Set format
Select WPS on the unit and press the WPS
button on the modem device that you wish to
connect with. Press SCROLL|SELECT dial on
unit or SELECT button on remote control to
continue.
Display the setting on the unit.
Select wireless network with DHCP enable/
disable.
To define a PIN number to be entered before
being able to connect to the unit remotely
over a network.
View the connected network.
Allows you to define whether the device
remains connected to its network in Standby
mode and when not in Network radio mode.
buttons to adjust the day and then press the
DAB / FM / Network / No update.
12 / 24 hour format.
buttons to select Time/
buttons to
buttons to select