Omnitronic DMP-103RDS Bedienungsanleitung Seite 22

16 Button CUE
17 Button [ II]
Tuner
No. Element
18 Button STANDBY
19 Button MUTE
20 Button RDS
21 Button AUTO SCAN
22 Buttons STATION + and –
23 Buttons TUNING/SCAN + and –
24 Display of the tuner
25 Station buttons 1-4, +5
26 Button MEMORY
27 Button FM.ST
28 Button AM/FM
• When pressing the button in pause mode and during playback the unit
stops and returns to the starting point of the title (cue point) and is in
pause mode (red LED lights).
• When keeping the button pressed in pause mode, the title is momentarily
replayed. As soon as you release the button the unit instantly returns to
the cue point.
• Every time a new cue point is set, the LED flashes repeatedly.
Switches between play and pause. During playback the blue LED lights, in
pause mode it flashes.
Function
Switches the unit to standby mode.
For muting the unit.
To indicate the additional information during RDS reception.
Starts the auto station memory.
For stepwise selection of the stored stations.
For station tuning
• long actuation: starts automatic station finding in forward or backward
direction.
• short actuation: the received frequency is increased or reduced step by
step.
For direct selection of the stored stations.
To store stations.
Switches the stereo function on and off.
Switches between AM and FM reception.
22