Operating Elements & Connections; Cd-Player - Omnitronic DMP-103RDS Bedienungsanleitung

4
OPERATING ELEMENTS & CONNECTIONS
CD player
No. Element
1 Power on/off
2 USB port
3 CD slot
Buttons , and +10
4
5 Button PROG/FLD
6 Button SINGLE
7
Button EJECT [ ]
8 Infrared sensor for the remote
control
9 Selector switch CD/USB
10 Standby indicator
11 Display of the CD player
12 Buttons PITCH [+] and [–]
13 Buttons IN, OUT and RELOOP
14 Button TIME
15 Button REPEAT
Function
For switching on and off.
For connecting a USB storage device.
For inserting a CD.
• : Each time the button is pressed, the unit will advance one title. Keep
the button pressed for fast forward in play mode and framewise search in
pause mode.
• : By pressing the button, the unit will go to the beginning of the title and
with each further actuation, the unit will go back another title. Keep the
button pressed for fast reverse in play mode and framewise search in
pause mode.
• +10: By pressing the button, the unit will advance 10 titles.
• Audio CD: For programming an individual title sequence.
• MP3 CD: For selecting folders. Each time the button is pressed, the unit
will go to the first title of the next folder.
This button determines the playback mode:
• Basic setting: continuous play of all titles of the data carrier. The unit
stops at the end of the last title.
• Actuation of the button selects single title play (red LED lights): after
playing a title, the unit is set to pause at the start of the next title.
Ejects and retracts the CD. While playing a CD, the CD drive is locked
against unintentional opening.
In pause mode, short actuation of the button allows switching between the
input sources CD and USB. In USB mode, the LED next to the USB port
lights up.
Lights up in standby mode.
Change the playback speed in 1% steps up to ±16 %. Press the button [–]
to decrease the pitch and the button [+] to increase the pitch step by step.
Buttons to memorize and play a seamless continuous loop.
• IN: Sets the starting point of a loop.
• OUT: Defines the end point of a continuous loop which is instantly
started. The loop will continue to play until the button OUT is pressed
once again.
• RELOOP: Starts the loop once again.
• Audio CD: Switches the time indication between elapsed, remaining title
and total remaining time.
• MP3 CD: Switches the time indication between elapsed and remaining
title time.
For selecting the repeat functions:
• first actuation of the button (indication 1): continuous repeat of the title
selected.
• second actuation of the button (indication A): continuous repeat of all titles.
21