End Of Programme; Troubleshooting; Disposal; Packaging - Silvercrest SMWC 700 B3 Bedienungs- Und Sicherheitshinweise

Turn the rotary control
time interval.
Note: The maximum time that can be set is
95 minutes.
Confirm your entry using the start button

End of programme

At the end of every programme, 5 signal tones are
emitted to signal that the selected process is complete.
Open the door
9
handle .
8
Carefully remove the food from the cooking
chamber.

Troubleshooting

Problem
The product won't start.
The product will not start
the cooking process.
The light in the product's
cooking chamber is not
working.

Disposal

Packaging:

The packaging is made of environmentally friendly
materials, which may be disposed of through your
local recycling facilities.
16 GB/IE/NI/CY
to set the desired
13
by pulling on the door
Cause
The mains plug is not firmly plugged in.
The fuse has burnt through or the switch-
disconnector has triggered.
Problems with the plug socket
The door is not closed properly.
9
The light bulb may be defective.
Cleaning, maintenance
and storage
If the product is not kept clean, this can lead to
. wear and tear which compromises the service life
12
of the product and leads to dangerous situations.
Clean the door
anism regularly.
7
The product must not be cleaned using a steam
cleaner.
Remove any food residues regularly.
Do not use harsh cleaning agents or scouring
agents.
Unplug the mains plug from the mains socket if
you are not using the product for a long period
of time.
Make sure that all parts are completely dry
before you use the product.
Clean the product using a soft sponge and
some soapy water.
The glass plate
Observe the marking of the packaging
materials for waste separation, which
b
a
are marked with abbreviations (a) and
numbers (b) with following meaning: 1–7: plastics /
20–22: paper and fibreboard / 80–98: composite
materials.
and the door locking mech-
9
is dishwasher-safe.
4
Solution
Unplug the mains plug and plug
it back in after 10 seconds.
Contact the service centre.
Check the socket with other
electrical devices.
Close the door .
9
Contact the service centre.