Maintenance And Service; Connectivity Functions; Maintenance And Cleaning - Bosch GST 18V-155 SC Professional Originalbetriebsanleitung

Circle cutter (accessory) (see figure K)
Exact round cuts are possible using the circle cutter (36)
and guide rail adapter (35). When using the circle cutter, ob-
serve the circle cutter operating instructions.
Coolant/lubricant
As the material heats up along the cutting line when cutting
metal, you should apply coolant or lubricant.

Connectivity functions

System Requirements for Using the App
System Requirements
Mobile device (tablet,
smartphone)
Installing and Setting up the App
You will need to install the device-specific app before you
can use the connectivity functions.
– Download the app from the corresponding app store
(Apple App Store, Google Play Store).
Note: You will need to have a user account with the relev-
ant app store to do this.
App name iOS
Bosch Toolbox
– Then select the MyTools or Connectivity sub-item in the
app.
– The display of your mobile device shows you all of the
subsequent steps required to connect the power tool to
the mobile device.
Data transfer via Bluetooth®
®
The built-in Bluetooth Low Energy Module sends a signal at
regular intervals. Depending on ambient conditions, multiple
transmission intervals may be required before the power
tool is detected. If the power tool is not detected, check the
following:
– Is the distance to the mobile device too great?
Reduce the distance between the mobile device and the
power tool.
– Switch Bluetooth® off and on again on your mobile device.
Check whether the power tool has now been detected.
Functions in Conjunction with the Power Tool
In conjunction with the Bluetooth® Low Energy module , the
following connectivity functions are available for the power
tool:
– Registration and personalisation
– Status check, output of warning messages
– General information and settings
Bosch Power Tools
– Management
– Programming the stroke rate levels
– Switching on/off and controlling ASC (GST 18V‑155 SC)
– Warning messages (temperature dependent overload

Maintenance and Service

Maintenance and Cleaning

u
Android 6.0 (and newer)
iOS 11 (and newer)
u
Clean the saw blade receptacle regularly. For this, remove
the saw blade from the power tool and lightly tap out the
power tool on a level surface.
If the power tool becomes very dirty, this can lead to serious
faults. For this reason, do not cut materials which generate
large quantities of dust from below or overhead.
If the dust outlet becomes blocked, switch off the power
tool, disconnect the dust extraction system and remove the
Android
dust and chips.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The recommended lithium-ion batteries are subject to legis-
lation on the transport of dangerous goods. The user can
protection, impact shutdown)
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
To ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.
1 609 92A 6Y3 | (27.07.2022)
English | 25