Electricity Connection - De Dietrich DHD 694 XE1 Montage- Und Gebrauchsanweisungen

ELECTRICITY CONNECTION

While connecting the electricity make sure that the tension is that indicated in the technical lable.
Before proceeding to cleaning or maintenance operations remove the tension.
Connecting the electricity must be performed by a specialised technician in conformity with the regulation in force.
This apparatus is constructed so as to belong to the I insulation class and therefore needs grounding.
MAINTENANCE
REMOVE THE TENSION AT THE HOOD (PLUG or SWITCH) BEFORE ANY OPERATION-
Thorough servicing guarantees correct and long-lasting operation.
-Maintenance of the casing:
Avoid products containing abrasives when cleaning the casing.
--Maintenance of the grease filters:
The grease filters require regular maintenance and must be cleaned on average every two months depending on use.
About every 30 hours of operation the hood signals that the grease filters need to be cleaned by the light button flashing (Fig.
17A).
Remove the grease filters: grip the knob and push it towards the opposite side of the filter and turn the filter outwards (Fig. 21).
Wash them with a normal neutral product available on the market and then thoroughly rinse and dry them. The filters can be
washed in a dishwasher. Refit the grease filters. After cleaning the grease filters, reset the hour counter by pressing the current
operating speed button.
Fig. 21
Fig. 22
-Maintenance of the grease drip trays:
The grease drip trays require regular maintenance and must be emptied and cleaned on average every two months depending
on use.
Removing the grease drip trays: Move the drip trays sideways towards the inside of the hood (Fig. 22) and remove them.
-Maintenance of the charcoal filter:
If using a hood in the filtering version, the charcoal filter needs to be replaced on average every six months depending on use.
Charcoal filter reference: AH4063-U1.
To remove the charcoal filter, first remove the grease filters (Fig.21). Then remove the charcoal filter by pushing the catch
inwards and turning the filter downwards until the 2 clips slip out of their seats (Fig. 23). Replace the charcoal filter and refit
the grease filters.
Fig. 23
-Changing the halogen lamps:
To change the halogen bulbs open the cover levering from the proper slots (Fig.24). Change with a lamp of the same kind.
CAUTION: Do not handle glass bulb with bare hands.
Fig. 24
15