Disabling Automatic Start Of The Simatic Ipc Diagmonitor Management Explorer; Monitoring A Pc Station With The Maintenance Station; Additional Information - Siemens SIMATIC IPC627D Produktinformation

Disabling automatic start of the SIMATIC IPC DiagMonitor Management
Explorer
The DiagMonitor monitoring software starts automatically when you log on to your device. The SIMATIC IPC DiagMonitor
Management Explorer configuration tool is then displayed automatically. You can disable this function.
1. Select the "Settings" item in the "Tools" menu of the SIMATIC IPC DiagMonitor Management Explorer configuration tool.
2. Disable the "Start with Windows" option.
3. Confirm your entries.

Monitoring a PC station with the maintenance station

You can find information on how to monitor a PC station from the maintenance station in the "Configuring the maintenance
stations" chapter of the "Process Control System PCS 7 Maintenance Station" function manual.

Additional information

You can find details about device features in Product Equipment Data (PED) tool (https://www.siemens.com/ped).
You can find up-to-date information and manuals for SIMATIC PCS at:
• SIMATIC PCS 7 Technical Documentation (https://support.industry.siemens.com/cs/ww/en/view/109794065)
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose
use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be
precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any
necessary corrections are included in subsequent editions.
Siemens AG
76181 Karlsruhe
GERMANY
SIMATIC IPC627D/677D
A5E50920299-AA, 05/2021
22
SIMATIC IPC627D/677D
A5E50920299-AA, 05/2021